简体中文   |  English
网站首页 > 产品中心 > 控温恒温系列

    370℃ 压铸模温机

    压铸模温机
    DIE CASTING MTC

    压铸、橡胶挤出、发泡等专用模温机系列
    CASTING,RUBBER EXTRUSION,FOAMING,AND OTHER SPECIAL MTC SERIES

    产品说明:公司针对压铸行业开发出来的一款高性能的设备。跟国内同行业相比性能更高,价格更优惠,是众多压铸厂家的首选模温机,压铸模温机、镁合金压铸模温机、铝合金压铸模温机、合金压铸模温机,使用优点工作温度最高可达370℃,采用当今最先进流程设计,控温精度高,导热速度快,高效节能。

    Die-casting Mold Temperature Controller
    Introduction:Xiecheng Die-Casting Mold Temperature Controller is high function equipment developed specially for die-casting industry. Compared with competitors,this is with higher performance but more reasonable price and it si the best choice for customers of magnesium,aluminum and alloy die-casting.The advantage of this type controller is processing temperature up to 370 ℃ ;designed with advance process;High accuracy in controlling temperature,fast heat exchange,efficient and energy-saving.

    特点:
    1.最高使用温度370℃。
    2.微电脑模式控制,操作简单易懂,采用全数位P.I.D双段控温系统,控温精度达到 ±0.1℃。
    3.主管路采用304不锈钢一体成型,管损小,加热均匀。
    4.选用304不锈钢高温闸阀,耐温性能好。
    5.安全保护及故障指示系统完善。
    6.采用高温磁力泵,无漏油的现象。
    7.采用间接冷却,升降温度速度快,温度精确稳定。
    8.具有关机自动降温等保护功能。
    9.模具回油温度检测指示。
    10.可订作多机并联。
    11.安全保护完善,故障显示,易于维修保养。
    12.隔离式电器控制箱,延长电器使用年限。

    FEATURE:
    1.Maximum running temperature as 370 ℃ .
    2.Adopted microcomputer controller,easy to operate .P.I.D. dual-stage temperature control system maintains an accuracy of ±0.1℃
    3.Main pipes are made of uni-body stainless steel,with uniform heating and low-loss.
    4.Equipped with 304 stainless steel high temperature sluice value,with good heat resistant performance.
    5.With suficient safety production and alarming system.
    6.Optional for high temperature magnetic pump with stable performance and no leakage.
    7.Adopts indirect cooling method,which realizes fast heating,makes temperature controller more precise and stable.
    8.With automatic shutdown cooling protection function etc.
    9.With temperature detecting indication of oil return.
    10.Multi-machine parallel is customized.
    11.Sufficient safety protection and visible alarm,easy for maintenance.
    12.Using isolated electric control box, to extend the lives of electric appliances.

    技术参数 SPECIFICATIONS

    计算公式:
    电热(KW)=模具重量(KG)x模具比热(Kcal/KG℃)x模环温差(℃)x安全系数/加热时间/860
    注:安全系数可以在1.3-1.5之间选取。

    流量(L/min)=电热功率(KW)*860、【热媒比热(Kcal/KG℃)x热媒密度(KG/L)x进出温差(℃)x时间(60)】
    媒密度(KG/L)x进出温差(℃)x时间(60)】
    注:水比热=1Kcal/KG℃
    热媒油比热=0.49Kcal/KG℃
    水密度=1KG/L
    热媒油密度=0.842KG/L

    Calculation Formula:
    Heating Power(KW)=mold weight(KG)*mold heat specific (Kcal/KG℃)*molding temperature difference(℃)xsafety factor/heating time/860
    Notice:Safety factor ranges from 1.3 to 1.5.

    Flow Rate(L/min)=Heating Power(KW)*860/[medium specific heat(Kcal/KG℃)*medium density(KG/L)*inlet and outlet temperature difference*time(60)]
    Notice:
    1.Water specific heat = 1Kcal/KG℃
    2.Heating Oil specific heat = 0.49Kcal/KG℃
    3.Water density=1KG/L
    4.Heating Oil density = 0.842KG/L

     

    机型 Model 单位 Unit XC-TM18KW-370 XC-TM24KW-370 XC-TM36KW-370
    温控范围 Temp. Control Range 370℃
    温控精度 Temp. Control Accuracy P.I.D. ±0.1℃
    电源 Power Supply AC3 380V 50HZ
    传热媒体 Heat Transfer Medium 导热油 Heat Transfer Oil
    冷却方式 Cooling Method 间接冷却 Indirect Cooling
    加热能量 Heating Capacity KW 9x2 12x2 12x3
    泵浦马力 Pump Power KW 1.5 2.2 3.75
    最大泵浦流量 Max.Pump Flow L/min 50 165 200
    最大泵浦压力 Max.Pump pressure KG/cm2 2.8 2.8 3
    储油量 Oil Tank Capacity Liter 30 30 30
    警报功能 Alert Function  缺相/缺水/超温/过载 Phase-Missing/Water Insufficient/Over-Heat/Over Current
    冷却水配管 Cooling Water Pipe mm 12 12 12
    循环油配管 Circulating Oil Pipe inch (1x1) (1x1) (1x1)
    外形尺寸 Dimension(L*W*H) mm 1325*560*1110 1325*560*1110 1325*560*1110
    净重约 Approx.Net Weight KG 205 215 220

     

    产品规格若有改变,恕不另行通知。We reserve the right to change specifications without prior notice.

     

    关键词:模温机厂家,模具恒温机

     

    地址:江门市江海区高新工业区金瓯路393号
    手机:15818062260  网站: www.jmxiecheng.com
    Copyright © 2017江门市携成机械有限公司版权所有  技术支持江门网站建设  

    关键词:江门塑料破碎机  江门塑料搅拌机  江门冷水机  江门碎料机  江门塑料除湿干燥机  江门自动供料系统  xml网站地图  txt网站地图

    粤ICP备16048080号